To view brand's products and information, simply choose a brand from the drop down menu.
 


(Current Product)
AVR2310 - DENON 7CH AV RECEIVER

SpecificationDownloadSimilar Products
Product Specification
  • Audio Processing
  • 5 x HDMI1.3a inputs
  • Dolby True HD
  • Dolby Digital Plus
  • Dolby Digital EX
  • Dolby Digital
  • Dolby Pro Logic IIz
  • Dolby Pro Logic IIx
  • dts-HDMaster
  • dts-HD High Resolution Audio
  • dts-ES dts 96/24
  • dts Neo:6
  • dts
  • SHARC 32bit floating point DSP
  • Burr Brown24-bit/192-kHz D/Aconverter
  • Auto set-up and calibration
  • Audyssey Multi EQ room equalisation
  • Audyssey Dynamic Volume
  • Audyssey DynamicEQ
  • New tower type microphone for more accurate measurements
  • Manual EQ
  • Identical quality and power for all 7 channels
  • Assignable surround back amplifiers to run Pro Logic IIz height channels
  • Assignable surround back amplifiers for Front A or B speaker Bi-ampimg for increase current drive.
  • Compressed Audio Restorer
  • Auto Lip Sync (HDMI 1.3a)
  • AM / FM radio
  • 56 preset radio station memory
  • Video Processing
  • 5 x HDMI1.3a inputs
  • 1080p 24fps compatible
  • Analogue to HDMI up conversion to 1080p/24fps
  • HDMI to HDMI conversion up to 1080p / 24fps 
  • Interlace to Progressive conversion
  • Anchor Bay ABT2010 multi bit scaler
  • Multi Cadence detection
  • Digital noise reduction on both SD & HD signals
  • Comprehensive picture adjustments
  • Supports Deep Colour 30/36 bits colour depth
  • xvColour support broader colour space
  • Component output
  • Digital Media Connectivity
  • Network audio & Jpeg compatible via optional ASD3N/W or ASD51N/W
  • iPod® audio, photo and video playback via optional ASD product family
  • Multi Zone / Multi Source
  • Independant source and volume for Zone 2
  • Assignable Surround Back amplifiers to Zone 2
  • Zone 2 fixed volume pre out for external amplifier
  • RS232 control port
  • IR in & outputs
  • 12volt / 150ma trigger
  • Build quality
  • Pure Audio Construction
  • All channels Discrete Analogue power amp design
  • Minimum signal path
  • Direct Mechanical Ground
  • Block design
  • High current power supply
  • New back panel layout
  • Convenient features
  • CEC (HDMI Control) Protocol
  • Audio & Video pass through on HDMI when in CEC standby mode
  • New GUI (Graphic User Interface) is superimposed over HDMI signal
  • 2 Line display
  • Sleep timer
  • Variable subwoofer crossover switching
  • 3 Quick Select Buttons
  • Auto Surround mode
  • Audio Delay function (max. 6 frames or 200 msec)
  • Muting level settings (Full/-40dB/-20dB)
  • Programmable remote control unit
  • Specifications
  • Rated output:
  • Front L/R (A, B):
    • 105 W+105 W (8 ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
    • 135 W+135 W (6 ohms, 1 kHz with 0.7 % T.H.D.)
  • Center:
    • 105 W (8 ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
    • 135 W (6 ohms, 1 kHz with 0.7 % T.H.D.)
  • Surround L/R
    • 105 W+105 W (8 ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
    • 135 W+135 W (6 ohms, 1 kHz with 0.7 % T.H.D.)
  • SurroundBack L/R
    • 105 W+105W (8 ohms, 20 Hz ~ 20 kHz with 0.08% THD.)
    • 135 W+135 W (6 ohms, 1kHz, THD 0.7%)
  • Output connectors:
    • Front: A or B 6~16 ohms
  • Input sensitivity / Input impedance:
    • 200 mV / 47 kO/kohms
  • Frequency response:
    • 10 Hz ~ 100 kHz — +1, –3dB 
  • S/N:
    • 100 dB 
  • General Power supply:
    • AC 230 V, 50 Hz
  • Power consumption:
    • 460 watts, 0.3 W (Standby)
  • Maximum external dimensions:
    • 434 (W) x 171 (H) x 377 (D) mm
  • Weight: 
    • 11.3 kg
  • For purposes of improvement, specifications and design are subject to change without notice.